Skip to content

Resources · ESRS

ESRS E5 Resource use and circular economy – requirements explained

ESRS E5 circular economy explained: material inflows, products, waste and recyclability.

Last updated:

ESRS E5 at a glance

01 What?
ESRS E5 is the topical standard on resource use and circular economy. It covers three sub-topics: resource inflows, resource outflows related to products and services, and resource outflows related to waste. It can be material, for example, for material-intensive sectors such as industry, construction, packaging, textiles or electronics and for companies with large volumes of waste. Reporting is required only if the topic comes out as material in the materiality assessment.
02 What information is required?
Besides policies, actions and targets, the standard covers metrics on inflows and outflows: which key materials flow into the company and how much of them comes from secondary resources, how durable, repairable and recyclable the key products are, and how much waste arises and where it goes.
03 What is included and what is not
E5 also covers marine resources such as gravel, deep-sea minerals or seafood, formerly part of E3, and fossil fuels not used for energy, for example for plastics. The greenhouse gas emissions and the energy consumption that the circular economy can reduce are reported under E1, pollutants and substances of concern under E2, and the effects on ecosystems under E4.
04 What is special?
The selection. Management identifies in its own assessment which materials and products are the “key” ones. Key materials are essential for manufacturing products or delivering services; key products are central to value creation or strategic objectives. The assessment considers internal factors such as volume, cost, revenue or strategic importance and external factors such as environmental and social impacts, regulatory demands or stakeholder expectations. The metrics on inflows and products cover only this selection.

What you need to know about ESRS E5

What ESRS E5 is about

ESRS E5 takes account of the EU Circular Economy Action Plan, the Clean Industrial Deal and existing law such as the Ecodesign for Sustainable Products Regulation (ESPR), the Waste Framework Directive, the Right to Repair Directive and the Critical Raw Materials Act. The disclosures are meant to show which resources flow into the company and how circular they are, how it contributes to the circular economy with its products and services, and how it handles waste. The circular economy principles are: designing out waste and pollution, keeping products and materials in circulation at their highest value, and regenerating nature.

The 5 disclosure requirements at a glance

The disclosure requirements show how the company manages resource use (E5-1 to E5-3) and what flows into the company and leaves it again (E5-4 and E5-5).

  • E5-1 Policies: the policies on resource use and circular economy. If circular economy principles or eco-design requirements are integrated into key products and circular economy services, the company must explain how
  • E5-2 Actions and resources: the key actions that the company implements and plans, and the significant financial resources allocated to them
  • E5-3 Targets: the targets the company has set on resource use and circular economy
  • E5-4 Resource inflows: which key materials the company uses, whether they contain critical or strategic raw materials, how much they weigh and how high the share of secondary resources is
  • E5-5 Resource outflows: how durable and repairable the key products are, how recyclable they and their packaging are, how much waste arises in the company’s own operations and how much of it is recovered and disposed of

Resource inflows: what flows in

Key materials include not only raw materials but also substances, components and finished products without which the company cannot manufacture its products or deliver its services.

  • Short description: each key material is described with its role for the business. Where it matters for understanding, technical and biological materials are distinguished
  • Marking critical and strategic raw materials: if a key material contains such raw materials under the Critical Raw Materials Act, this must be stated. The example from the standard: a battery that contains lithium
  • Quantity and circular share: total weight and breakdown per material, in weight or percent, plus the secondary resources, as weight or share of the total weight of key materials. Secondary resources include recycled material, but also reused, repaired, refurbished or remanufactured products and components

Resource outflows: products and waste

This covers what leaves the company: the key products with their packaging and the waste from its own operations. What becomes of the products after sale does not enter the waste metrics. Durability, repairability and recyclability give information on this.

  • Expected durability and repairability of key products: qualitative or quantitative. Repairable means: spare parts over the entire possible life span, simple disassembly and accessible repair information
  • Designed recyclability rate: weight of recyclable materials divided by total weight, times 100, separately for product and packaging. Recyclable means that existing recycling systems can process it into recycled material
  • Waste: waste streams by name, for example from the European List of Waste, and the key materials they contain; total weight; the shares recovered (preparation for reuse, recycling, other recovery) and disposed of (incineration, landfill, other disposal), each split into hazardous and non-hazardous; the share with unknown destination, and radioactive waste
  • Weight in the original state: waste is weighed as it arises, not as dry weight. Incineration with energy recovery counts as other recovery only if it meets the conditions of the Waste Framework Directive for energy recovery

Phase-in periods

Unlike E4 or the social standards S2 to S4, E5 cannot be deferred as a whole, and it has no phase-in periods of its own. Only the general reliefs apply, for example for anticipated financial effects. The revised ESRS apply from financial year 2027. A special rule applies to financial year 2026: wave-one companies that, at the balance sheet date, do not exceed at least one of the two thresholds (EUR 450 million net turnover or an average of 1,000 employees) may omit all topical standards if they already apply the new set. They must, however, state whether resource use and circular economy are material. If the topic is material, they briefly describe how their business model and strategy take account of the impacts, their targets and progress, policies and actions, and disclose relevant metrics, as ESRS 2 requires.

Typical data sources in the company

Much of the data already exists, just in different places:

  • ERP and purchasing supply goods receipts, bills of materials and material weights, plus supplier statements on recycled content
  • Product development knows the material composition and the disassembly and repair information. For products under the Ecodesign Regulation, the digital product passport will be added once a delegated act requires it for the product group
  • Waste management: under the Waste Framework Directive, producers of hazardous waste keep chronological records of the quantity, nature and origin of their waste and, where relevant, of its destination and the treatment method foreseen. Member States may also require this for non-hazardous waste. In addition, there are the records of waste contractors with waste codes and treatment methods. Companies that prepare a GHG inventory have often already collected the waste quantities for Scope 3 category 5
  • Packaging management supplies the packaging quantities placed on the market by material, for example from the reports to collection and recovery schemes

Typical mistakes and challenges

These points often come up in practice:

  • Losing the overview and wanting to report everything: instead of recording every type of material, what counts for inflows and products is the key materials and key products. This selection does not apply to waste: the waste metrics cover all waste from the company’s own operations. Companies that do not make and justify the selection early get lost in details and overlook what really counts for the business
  • Underestimating waste data: a total from the waste contractors’ invoices is not enough. What is needed is the split into recovery and disposal and the actual treatment route. Sites outside the EU make this complex: what counts as hazardous may be classified differently there, and data on quantities and treatment routes are often incomplete. For the report, the classification under EU law still applies

Frequently asked questions about ESRS E5

The Critical Raw Materials Act has two lists. Critical are 34 raw materials that are particularly important for the EU economy and have a high supply risk. Strategic are 17 raw materials that are particularly needed for the energy transition, digitalisation, and defence and space, whose demand is growing strongly and whose production is hard to scale up, for example battery-grade lithium and graphite, cobalt or rare earth elements for permanent magnets. All strategic raw materials are also on the critical list. The lists also include widely used materials such as aluminium or copper. They count at every processing stage, so also in components and bought-in parts. The lists will be reviewed by May 2027 and every three years thereafter.

No. Key materials also include components and finished products that are essential for the business; the standard names smartphones as an example. For retailers or service providers, E5 can therefore become material through the products sold or used, packaging and waste.

The Ecodesign Regulation creates the framework for requirements on products, for example on durability, repairability and recyclability. They are set per product group in delegated acts. It also introduces the digital product passport. E5 requires reporting on this, not compliance with the requirements. Companies that manufacture products under the Ecodesign Regulation can, however, use the data for E5.

The waste metrics cover only the company’s own operations. If material impacts lie with suppliers or customers, for example in raw material extraction or at the end of product use, these metrics do not cover them. In that case, the value chain and the policies, actions and targets for it belong in the disclosures, to the extent necessary for an understanding. If there are no policies, actions or targets on this, that must be stated. Where the metrics are not sufficient, entity-specific metrics must be added.

Book a demo

Bring E5 data from purchasing and waste records together

In a free demo we’ll show you how NetCero maps your sustainability data to the ESRS and structures your reporting.

Book a demo